DBE63
From ThinCan
The DBE63 is an upcoming product that uses the AMD Geode LX design found in the DBE61 and DBE62 with a VIA VT6122 Gigabit Ethernet controller. The prominent differences from the other products in the product line are DDR1 SO-DIMM memory module slot instead of soldered on-board RAM, CompactFlash slot instead of NAND flash, existence of a RTC battery, and a line out connector.
Contents |
Specification
| CPU | AMD Geode LX700 @ 433MHz |
| Firmware ROM | 1024KB FWH NOR Flash |
| Mass Storage | CompactFlash slot |
| Memory | One DDR1 SO-DIMM slot, up to 1GB |
| Network Controller | VIA Velocity™ Gigabit (VT6122) |
| Video Resolution | up to 1920x1440@85Hz |
| Audio | AC97 v2.3 (ALC203) |
| Approximate Dimensions | 150mm x 95mm x 32mm |
| Approximate Weight | 290g (without Power Supply) |
| External Power Supply | 9V to 16V DC |
| Power Consumption | approximately 5W |
| Operating Temperature | 5°C to 40°C |
Driving the DBE63
- The DBE63 is covered by the same Linux and X.org drivers as the DBE61.
- The VIA VT6122 network controller is supported by the Linux kernel module via-velocity or VIA Linux driver velocityget available from VIA Arena.
Booting the DBE63
The DBE63 benefited from the Coreboot development efforts made for the DBE61 and other GeodeLX based boards. Initial support for this upcoming product has already been contributed to Coreboot-v3 behind incomplete boards choice (CONFIG_EXPERIMENTAL).
